Categories
- Kompozit gépek
- Additives
- Adhesives
- Chopped strand mats
- Core materials
- Epoxy resins
- Fabrics
- Fillers
- Gelcoats
- Grinding and polishing materials
- Jesmonite ® acrylic systems
- Pigments
- Polyester resins
- Polyurethane resins
- Release agents
- Safety equipments
- Silicones
- Tools and auxiliary
- Vacuum bagging materials
- Vinylester resins
Product Details
Mould release wax Oskar's M 800
 |
OSKAR S M-800 is especially formulated for mouldings with high exoterm temperature or preheated moulds in polyester, epoxy, aluminium or nickel. lt contains a mixture of high quality synthetic waxes and lubricants, to provide an outstanding heat resistant mould protection and easy release of finished parts.
-
Application Instructions:1. Apply wax liberally. Spread evenly in circular motion over ca. 70 - 80 cm in square. Make sure the wax completely covers the entire surface.2. Immediately wipe off excess wax. As a slight haze appears, lightly, and without pressure, polish with a clean soft and dry cotton waste er using several pieces - frequently changing the pieces so fresh and dry areas are always used. Polish to a deep brillant gloss.3. If the wax is allowed to dry before being polished, apply a second coat, wipe and polish immediately. Do not use a power buffer with M-800.
-
Weight 400 g/pcs